- A complete fall arrest system requires three primary components: an approved full body harness, connector and anchorage connector
- In general, anchors can be connected to a variety of materials such as steel, wood and concrete *
- The anchor should be located directly above the worker to prevent swinging
- The height of an anchor is a key variable when determining fall clearance
- As with all fall protection products, anchors must be inspected by a competent person at a minimum annually * RB-9800: for wood only
- Built with a minimum tensile strength of 5,000 lbs
- Meets or exceeds CSA Z259.15 and ANSI Z359.18 standards and OSHA requirements
- 310 lb capacity for 1 worker (combined weight of person, tools, clothing, etc.)